VEL#043 - PayFacto PAX S300
Interface : PayFacto CAN
Compatible terminal model : PAX S300
Admin code : The admin code is provided by PayFacto and should be included on a sheet
in the package box
Terminal Setup
Press on
the F button
Select 3- SETUP
Select 1- OPTIONS
Enter the admin password
MERCHANT
LANG: Select your language
APPLICATION MODE: 1- REST
TERMINAL TYPE: 3- BOTH
TIP
OPTION: 1- YES or 2- NO
Enter the
TIP PRESET 1 percentage
Enter the
TIP PRESET 2 percentage
Enter the
TIP PRESET 3 percentage
MANUEL TIP PERC. INPUT : 1- YES or 2- NO
PRINT
PREAUTH TOTAL LINE: 2- NO
CASHBACK
OPTION: 1- YES or 2- NO
ENTER LAST 4 DIGITS: 2- NO
INVOICE NUMBER: 1- OFF
BUZZER: 1-OFF or 2- ON
OKS BEFORE
PRINT: 2- NO
OKS ON
SETTLEMENT: 2- NO
COMPL.
W/O PAUTH: 2- NO
SETT. HST TOTALS: 1- YES
PAY. TYPE QUES: 2- NO
3- SYSTEM SETUP
Enter the Admin password
Confirm the terminal date
Confirm the terminal hour
ECR TYPE: 2- CTP GATEWAY
ETHERNET
SETUP: 1- DYNAMIC or 2- STATIC
Take
note that it’s not mandatory to have a static IP address with this terminal as
it’s a cloud base solution
TEST CONNEXION +OK : 1- YES or 2- NO (if you want to test the connection)
*** If the communication between PayFacto<->Terminal, please use the 'Static' mode with the DNS 8.8.8.8 instead of the router's DNS. We had issues with Mikrotik routers ***
Once the setup is done. Press the Red button until you are back to the welcome screen
To enable the ECR interface, you need to press the Yellow button once. After that you’ll see
ECR: waiting
Backoffice Setup
Electronic funds transfer
Configuration / Configuration
Protocol : PayFactoCAN VelPAY
Model : PAX S300
Speed : N/A
Time
out delay: Enter at least 200
to give enough time for the customer to complete the payment
If you
want to enable the automatic batch closure, you can check it and input the hour
Address : www.ctpaiement.com
Port : 6443
Merchant number : Client’s merchant number
Token: See steps ‘Generate the PayFacto Token’
Username: The company number should be written on the
same sheet as the admin password.
Workstation Setup
Backoffice
Point of sales control
Workstations / Workstation’s
setup
Interfaces tab
Check EFT
Select TCP/IP
Type Regular
The IP
address doesn’t matter, you can input 0.0.0.0
Port : 1
EFT ID : Input the 5 digits TPV NUMBER provided by PayFacto
Generate
the PayFacto token
In order
to generate the Token, you will have to connect to the payment manager portal (https://www.ctpaiement.com/ps/home) and access the menu:
Customer
AdministratorAPI Keys
Copy the
token and input it into the EFT configuration
(Please see steps 2.K)
The credentials are provided by
PayFacto
Communication Test
You can now open the workstation
and do a communication test.
Functions / Electronic funds transfer / POSPAD / Communication Test