SecureTable Application Configuration

SecureTable Application Configuration

SecureTable Application Configuration

Access SecureTable app settings

  1. From the SecureTable home screen, touch the cog wheel icon (  ) at the top-right of the screen.
  2. The FUNCTIONS menu will be displayed. Touch the CONFIGURATION button.

 

  1. You will be prompted to enter a password before you can access settings. Enter the password and press the OK key.
  2. The SETTINGS screen will be displayed.

 

NOTE: The default password after a new installation is 1234.

Configure Basic Settings

NOTE: Before configuring the IP address or URL, it is strongly recommended to start the STPI Client on the PC where it was installed, and make sure it is running properly. This will allow you to test the communication right away.


IP / URL toggle switch

By default, the toggle switch is set to IP, and the field is labeled STPI IP Address. By touching the toggle switch, the field will change to STPI URL Address.


STPI IP Address

Enter the IP address of the PC where the STPI Client is installed and running.

STPI URL Address

Type in the URL of the resource where the STPI Client is installed and running.

Find STPI

After entering the IP address or URL, touch this link to verify the communication between your payment terminal and the STPI Client.

NOTE: The STPI Client needs to be up-and-running and the PC on which it is installed needs to be accessible through your local network.

STPI Port Number

This field displays the current TCP port number used for communication with the STPI Client.

NOTE: This setting can only be modified from the Advanced Settings screen and is displayed here for information purposes only.

Advanced Settings

Touch this link to access the Advanced Settings screen.

Functions Menu

Touch this link to access the Functions Menu screen.

SAVE

Touch this button to save your changes and return to the home screen.

NOTE: On a brand-new installation, the application will not let you save your settings with an empty (blank) STPI Port Number. To prevent this issue, go to the Advanced Settings screen, configure the STPI Port Number, Save, and then go back to the basic settings screen to set the IP address or URL.

Configure Advanced Settings


STPI Port Number

Default: 9999

This is the TCP port number used by STPI. Be sure that this TCP port is unblocked by your network administrator.

POS Type

  1. Select 1 for Maitre’D, Veloce or any other POS. (Except Micros or Squirrel.)
  2. Select 2 for Micros.
  3. Select 3 for Squirrel.

Tip

Enable this option to have the SecureTable application prompt for tip entry. Disable it to prevent tip entry.

Tip Preset (Select percentages)

Configure pre-set tip percentages that the customer will see when prompted for tip.

Tip Threshold

Enter the maximum allowed tip percentage. Any tip amount that exceeds this percentage will require the settings password to be entered.

Setting Password

Configure the password used to access settings. this is also the password that will be requested if the customer enters a tip amount that exceeds the Tip Threshold.

Enable search by Table Number

Enable this option to have the device prompt the server for a table number. This allows the device to search for all available checks for a given table number.

Enable Search by Check Number

Enable this option to have the device prompt for a check number. This allows servers to enter a check number in order to directly access a check, instead of selecting the check from a list.

More Settings

Touch this link to view more advanced settings.

SAVE

Touch this button to save your changes and return to the home screen.

Configure More Advanced Settings


Tip on Tax

Enable this option to calculate the tip percentage from the total check amount including taxes. If this option is disabled, the tip amount will be calculated on the sub-total instead, which does not include taxes.

Cash

Enable this option to allow cash payments to be applied on checks from the SecureTable application.

Auto Start

Enable this option to have the SecureTable application start automatically when powering on the device.

Exit Password Required

With this option enabled, the SecureTable application will request the settings password before allowing itself to close.

Delivery

Enable this option to use the SecureTable application in Delivery mode.

Currency

Select the default currency for your region. Supported currencies are:

  1. Canadian Dollar (CAD ($))
  2. United States Dollar (USD ($))
  3. United Kingdom Pound (GBP (£))
  4. European Union Euro (EUR (€))
  5. Australian Dollar (AUD ($))

Enable No-Password Menu

Enable this option to allow users to access the Functions menu without entering a password. Enabling this option will also unlock access to the Reports Printing, Log Options and Receipt Reprinting options below.

Allow Reports Printing

Enable this option to allow users to access and print the Detailed Report and Summary Report from the SecureTable Functions menu.

Allow Receipt Reprinting

Enable this option to activate the Reprint Receipt option in the Functions menu.

WiFi Settings

Use this shortcut to configure the device’s WiFi settings.

SAVE

Touch this button to save your changes and return to the home screen.

NOTE: The device MUST be connected to your WiFi network and have internet access. Otherwise, payments cannot be processed and payment information cannot be transmitted to the POS system.

NOTE: Be sure to touch the SAVE button to save your changes. Using any other button to exit from the settings screen will discard all changes.




    • Related Articles

    • SecureTable Application - Basic Navigation

      SecureTable Application - Basic Navigation Starting the SecureTable Application If the SecureTable application does not start automatically, simply touch the appropriate icon on the Android home screen. A splash screen will briefly be displayed, ...

    • SecureTable Application Functions

      SecureTable Functions No Password Menu NOTE: Before the No Password menu can be used, the corresponding option needs to be enabled in the SecureTable application settings. Please consult the Enable No Password Menu option in the SecureTable ...

    • SecureTable CA Release Notes

      Release Notes - SecureTable - 4.75 Task TER-2144 STP - Automatically enable, and force auto backup feature TER-2145 STP - Create a backup when app starts if the app doesn't already have a backup TER-2146 STP - Ensure the return of data setting ...

    • SecureTable US Release Notes

      Version 4.69.2 Bug TER-1799 Critical Exception - IllegalStateException from FragmentMultipleChecks is fixed TER-1798 Critical Exception - Null pointer exception from AbstractCheckSelection is fixed TER 1795 PATT 4.69.1 App now responds after approved ...

    • SecureTable Installation on Android Payment Terminals

      SecureTable Installation on Android Payment Terminals After the STPISecure client is installed, configured and running properly on the POS system, make sure that all payment terminals are properly configured so they can communicate with the POS ...